Sensor delivery unit transmitter receiver, What are the key parts of my system – Abbott Freestyle PRT03831-xxx User Manual

Page 13

Advertising
background image

OVER

What are the key parts of my system?

Your FreeStyle Navigator system includes the following major parts:

A FreeStyle Navigator Sensor that you insert about 5 mm under your skin. Each inserted sensor is

a.

intended to remain in place and provide a continuous glucose reading for up to 5 days. The sensor is

contained in the Sensor Delivery Unit.
A wireless FreeStyle Navigator Transmitter (Tx), a small electronic device that connects to the sensor

b.

and sends glucose values to the receiver once every minute.
A wireless FreeStyle Navigator Receiver (Rx) that captures and displays glucose measurements. With the

c.

press of a button, the receiver displays the glucose measurement taken from the sensor.

Note: The receiver also has a built-in FreeStyle Blood Glucose Meter that can be used for blood glucose

testing. The receiver should always be kept with you on a belt, in a pocket, or in a purse.

Sensor

Measures your glucose level.
Sensor Tip

Part of sensor inserted into your skin.

Locking Pin

Prevents accidental discharge;

must be removed before insertion.

Insertion Button

Pushes a tiny needle into the

skin to place the sensor tip just

under the surface of the skin.

Sensor Inserter

Inserts the sensor into

the skin. Must be disposed

after inserting the sensor.

Sensor Support Mount

Stays on your skin after sensor is inserted.

Holds the sensor in place. Attaches the

sensor to the transmitter.

Release Tabs

Releases the sensor inserter

from the sensor support mount.

Adhesive Protective Liner

Adhesive that is affixed to your skin.

Tabs

Guides

UP and DOWN Arrow Buttons

Used to move through lists to highlight

options and change numbers.

LEFT and RIGHT Option Buttons

Used to select options shown on the

screen. The RIGHT Option button also

turns the receiver on.

Display Screen

Displays glucose levels

and other information.

Test Strip Port

Where FreeStyle Test

Strips are inserted to

calibrate the receiver

or manually check

blood glucose levels.

Sensor

Delivery

Unit

Transmitter

Receiver

Receiver in Receiver Skin

Section 1

3

Getting Acquainted

Advertising