Steps do this 8 – Abbott Freestyle PRT03831-xxx User Manual
Page 86
Steps
Do This
8.
Set System Alarms.
Important: If you turn off the System Alarms, the receiver
will NOT prompt you to do the calibration tests after you
insert a new sensor.
a. Select System Alarms from the Alarms menu.
b. Review or change your settings.
• Press the LEFT Option button (Next) to move
from one field to the next.
• Use the UP/DOWN Arrow buttons to change
the setting in any field.
• Press the RIGHT Option button (Set) to accept the
settings and return to the Alarms menu.
Note: The receiver will respond with a brief sample
of the alarm you selected.
c. Decide what to do next.
Decide what settings you want:
• Alarm on or off.
• Alarm type (Setting).
– Low, medium, or high beep.
– Short, medium, or long
vibration.
• You are setting, reviewing, or changing
all alarms.
Continue to the next step.
• You are finished setting, reviewing, and
changing alarms.
Go to Step 11.
If
Then
Customer Care: 1-866-597-5520
76
Section 8
Set, Review, or Change the Alarm Settings
Alarm Settings 08:30A
High Glucose (275)
Projected Low (On)
Projected High (Off)
Data Loss
System Alarms
Main Select