Abbott Freestyle PRT03831-xxx - Manual (Page 80)

Steps Do This
1.
Access the Alarms menu
from the Main menu.
Note: If you don’t press any buttons within 12 seconds,
the receiver screen will go blank and the last change will
be lost if you haven’t pressed the Select button.
a. Press the UP Arrow button or the DOWN Arrow
button to highlight Alarms.
b. Press the RIGHT Option button (Select) to go to the
Alarms Setting screen.
2.
Decide what to do.
Note: In all the subsequent steps choosing the Next button will allow you to go from one field to
another. For example, you can go from the ON/OFF field to the Glucose threshold field to the
alarm setting field. Choosing the UP/DOWN Arrow button will allow you to choose the value you
want for the field.
For example, choose ON or OFF for the alarm, choose a number for the threshold like 70 mg/dL
or choose medium beep or long beep for the alarm setting.
Review the alarm performance data in Section 18 for a detailed analysis of the effectiveness of the
glucose alarms.
• Set, review or change the Low glucose alarm. Go to Step 3.
• Set, review or change the High glucose alarm. Go to Step 4.
• Set, review or change the PROJECTED Low glucose alarm. Go to Step 5.
• Set, review or change the PROJECTED High glucose alarm. Go to Step 6.
• Set, review or change the Data loss alarms. Go to Step 7.
• Set, review or change the System alarms. Go to Step 8.
• Set Progress tones. Go to Step 9.
• Mute all audible alarms. Go to Step 10.
If you want to Then
Customer Care: 1-866-597-5520
70 Section 8
Set, Review, or Change the Alarm Settings
Main 08:30A
Glucose
Alarms
Reports
System
Add Event
Select