Abbott Freestyle PRT03831-xxx - Manual (Page 85)

OVER
Steps Do This
7.
Set, review, or change the
Data Loss alarms.
Important: If you turn off your Data Loss alarms, you must
also turn off your Low Glucose, High Glucose, Projected Low
and Projected High alarms.
a. Select Data Loss from the Alarms menu.
• Use the UP/DOWN Arrow buttons to highlight Data
Loss.
• Press the RIGHT Option button to select Data Loss.
b. Review or change your settings.
• Press the LEFT Option button (Next) to move
from one field to the next.
• Use the UP/DOWN Arrow buttons to change
the setting in any field.
• Press the RIGHT Option button (Set) to accept the
settings and return to the Alarms menu.
Note: The receiver will respond with a brief sample
of the alarm you selected.
c. Decide what to do next.
Decide what settings you want:
• Alarm on or off.
• Alarm type (Setting).
– Low, medium, or high beep.
– Short, medium, or long
vibration.
• You are setting, reviewing, or changing
all alarms.
Continue to the next step.
• You are finished setting, reviewing, and
changing alarms.
Go to Step 11.
If Then
Section 8 75
Set, Review, or Change the Alarm Settings
Alarm Settings 08:30A
Low Glucose (70)
High Glucose (275)
Projected Low (On)
Projected High (Off)
Data Loss
Main Select