Reconnect the receiver to the transmitter – Abbott Freestyle PRT03831-xxx User Manual
Page 28
Reconnect the Receiver to the Transmitter.
Place the receiver within 10 feet of the transmitter.
a.
Press the
b.
RIGHT Option button twice to display the
Main Menu screen.
Use the UP
c.
or DOWN Arrow button to highlight System.
Press the RIGHT
d.
Option button (Select) to display the
System menu with Reconnect highlighted.
Pr
e.
ess the RIGHT Option button (Select).
Wait for th
f.
e receiver to beep. If it beeps:
Twice – The s
•
ystem is connected.
Three times – The sys
•
tem is not connected. Make
sure the battery in the transmitter is new and ensure
that the receiver and transmitter are linked (see
Section 14).
Note: If the transmitter and receiver are connected
properly, the disconnect icon
will not appear on
the screen.
END OF Section 2
Check your work.
Result: An operational system.
You have done this procedure correctly when:
o
The batteries have been installed and the battery doors
have been closed securely.
o
The old batteries have been disposed of properly.
o
The transmitter and receiver have been reconnected.
Customer Care: 1-866-597-5520
18
Section 2
Install or Replace Transmitter and Receiver Batteries
System Menu 08:30A
Reconnect
Data Upload
Status
Link
Set Date/Time
Main Select