Steps do this 1 – Abbott Freestyle PRT03831-xxx User Manual
Page 46
Important Things to Know About Getting Reliable Results
Caution:
Movement of the sensor support mount or excessive perspiration at the sensor insertion site due
to activities like vigorous exercise or bumping against objects may lead to poor adhesion of the support
mount to the skin and then cause the sensor to dislodge. If the sensor dislodges due to the sensor support
adhesive failing to adhere to the skin, you may get unreliable results or no results. The system may not
provide a warning in such circumstances. Choose the proper sensor insertion site when inserting the
sensor and prepare the site by following the instructions for site preparation.
Caution:
If your results from the Continuous Monitoring mode seem erroneous, check and make sure
that the sensor has not dislodged. If you notice the sensor is dislodged from the skin, or if you see that the
adhesive on your overbandage or the sensor support mount is coming loose, discard the old sensor and
insert a new sensor.
Steps
Do This
1.
Decide what to do.
• Change or remove your sensor.
Go to Step 2.
• Insert your sensor.
Go to Step 4.
If you want to
Then
Customer Care: 1-866-597-5520
36
Section 5
Insert or Remove Your Sensor