If the display is then – Abbott Freestyle PRT03831-xxx User Manual

Page 27

Advertising
background image

OVER

Match what you see on your Receiver with ONE of the screen
shots shown below.

If the display is

Then

Press the RIGHT Option button to see if the screen

turns on.

If screen turns on, compare with the screens below

and perform the matching steps.
If screen does

NOT turn on, then repeat this

procedure ensuring that the batteries are:

– New.
– Oriented properly in the battery compartment.
– If the problem persists see Section 10 on

troubleshooting.

The receiver is working properly. Go to “Check your

work”. You may not see the icon if you have

connection between the transmitter and receiver.

Reconnect the transmitter and receiver if you see the

icon.

The time and date need to be set. Go to Step 4 of

Section 3.
Set the Time and Date. After setting the time and date,

reconnect the transmitter and receiver. Then, “Check

your work”.

Select the mode that you want the system to operate in.

Go to Section 14 to link the transmitter and receiver.

Go to “Check your work”.

Section 2

17

Install or Replace Transmitter and Receiver Batteries

Glucose CM 08:30A

Main

Set Date/Time 08:30A

08 : 30 A
05 - 10 - 2005

Next Set

Select Mode 08:30A

Continuous Mode CM
Blood Glucose BG

BG CM

Advertising