Allied Telesis AT-S63 - Manual (Page 109)

AT-S63 Management Software Menus User’s Guide
Section I: Basic Operations 109
Deleting All Dynamic MAC Addresses
To delete all dynamic unicast and multicast MAC address from the MAC
address table, perform the following procedure:
1. From the Main Menu, type 4 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 31 on page 102.
2. From the MAC Address Tables menu, type 2 to select MAC Addresses
Configuration.
The MAC Addresses Configuration menu is shown in Figure 35 on
page 106.
3. From the MAC Addresses Configuration menu, type 3 to select Delete
All Dynamic MAC Addresses.
The following prompt is displayed:
All learned MAC (non-static) addresses will be deleted
Do you want to continue? [Yes/No] ->
4. Type Y to delete the addresses or N to cancel the procedure.
If you respond with yes, all dynamic unicast and multicast addresses
are deleted from the table, and the switch begins to learn new
addresses.