Allied Telesis AT-S63 - Manual (Page 235)

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 235
Deleting All ACLs
This procedure deletes all ACLs from the switch.
To delete all ACLs, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 77 on page
228.
3. From the Access Control Lists (ACL) menu, type P to selection Purge
ACLs.
Caution
No confirmation prompt is displayed. All ACLs are immediately
deleted from the switch.
4. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.