Allied Telesis AT-S63 - Manual (Page 513)

AT-S63 Management Software Menus User’s Guide
Section VI: Virtual LANs 513
If you enter Q or M, the following prompt is displayed:
Enter Uplink VLAN Port number -> [1 to 24] ->
4. Enter the port number on the switch that will function as the uplink port
for the other ports. You can specify only one port.
The following prompt is displayed:
SUCCESS
Press any key to continue ...
The new VLAN mode is now active on the switch.
Note
If you are accessing the switch remotely and lose connectivity to the
unit, wait for the console timer to expire on your interrupted remote
management session and then use a local management session to
continue managing the unit. The default for the console timer is 10
minutes.
5. To permanently save your changes, return to the Main Menu and type
S to select Save Configuration Changes.