Allied Telesis AT-S63 - Manual (Page 457)

AT-S63 Management Software Menus User’s Guide
Section V: Spanning Tree Protocols 457
7. Adjust the following parameters as necessary:
1- Port External Path Cost
The port cost of the port if the port is connected to a bridge which is a
member of another MSTP region or is running STP or RSTP. The
range is 0 to 200,000,000. The default setting is Auto, which sets port
cost depending on the speed of the port. Table 11 lists the MSTP port
costs with the Auto setting when the port is not a member of a trunk.
Table 12 lists the MSTP port costs with the Auto setting when the port
is part of a port trunk.
2 - Point-to-Point
This parameter defines whether the port is functioning as a point-to-
point port.
3 - Edge Port
This parameter defines whether the port is functioning as an edge port.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Table 11 Auto External Path Costs
Port Speed Port Cost
10 Mbps 2,000,000
100 Mbps 200,000
1000 Mbps 20,000
Table 12. Auto External Path Trunk Costs
Port Speed Port Cost
10 Mbps 20,000
100 Mbps 20,000
1000 Mbps 2,000