Allied Telesis AT-S63 - Manual (Page 653)

AT-S63 Management Software Menus User’s Guide
Section IX: Management Security 653
5. Make the desired changes to the entry by selecting the corresponding
option and entering a new value. You cannot change an entry’s ID
number. For information on an entry’s IP address, network mask, and
applications, refer to steps 5, 6, and 7 in the procedure “Creating an
ACE” on page 650.
6. After entering your changes, type M to select Modify Management ACL
Entry.
Your changes are immediately implemented on the switch.
7. After making your changes, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.