Allied Telesis AT-S63 - Manual (Page 283)

AT-S62 Management Software Menus User’s Guide
Section II: Advanced Operations 283
6. To change the port’s priority, type 2 to select Power Priority and, when
prompted, type C for Critical, H for High, or L for Low. A port can
belong to only one priority level at a time. The default is Low.
7. To change the maximum amount of power the port can supply to the
device, type 3 to select Power Limit and enter a new value in milliwatts.
The default value is 15,400 mW.
A change to a parameter value is immediately activated on the switch.
8. After making your changes, type R until you return to the Main Menu.
Then type S to select Save Configuration Changes.