Clearing vlan to msti associations – Allied Telesis AT-S63 User Manual
Page 454
Chapter 23: Multiple Spanning Tree Protocol
454
Section V: Spanning Tree Protocols
Clearing VLAN
to MSTI
Associations
To clear VLAN to MSTI associations, perform the following procedure:
1. From the Main Menu, type 3 to select Spanning Tree Configuration.
The Spanning Tree Configuration menu is shown in Figure 151 on
page 416.
2. From the Spanning Tree Configuration menu, type 3 to select Configure
Active Protocol.
3. From the MSTI Configuration menu, type V to select VLAN-MSTI
Association menu.
The VLAN-MSTI Association menu is shown in Figure 164 on page
451.
4. From the VLAN-MSTI Association menu, type 4 to select Clear VLAN
to MSTI Association.
The following prompt is displayed:
Enter the MSTI ID: [1 to 15] ->
5. Type the MSTI ID number and press Return.