Allied Telesis AT-S63 - Manual (Page 518)

Chapter 27: Protected Ports VLANs
518 Section VI: Virtual LANs
Creating a Protected Ports VLAN
To create a new protected ports VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
2. From the VLAN Configuration menu, type 3 to select Configure
VLANs.
3. From the Configure VLANs menu, type 1 to select Create VLAN.
The Create VLAN menu is shown in Figure 192.
Figure 192. Create VLAN Menu
Note
The appropriate setting for Option 3, VLAN Type, for a protected
ports VLAN is the default setting, Port Based.
4. Type 1 to select VLAN Name.
The following prompt is displayed:
Enter new value ->
5. Type a name for the new protected ports VLAN.
The name can be from one to fifteen alphanumeric characters in
length. The name should reflect the function of the nodes that will be a
part of the protected ports VLAN (for example, InternetGroups). The
name cannot contain spaces or special characters, such as asterisks
(*) or exclamation points (!).
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Create VLAN
1 - VLAN Name ............
2 - VLAN ID (VID) ........ 2
3 - VLAN Type ............ Port Based
4 - Tagged Ports .........
5 - Untagged Ports .......
6 - Protected Ports ...... No
C - Create VLAN
R - Return to Previous Menu
Enter your selection?