Figure 1: main menu – Allied Telesis AT-S63 User Manual
Page 30
Chapter 1: Basic Switch Parameters
30
Section I: Basic Operations
Configuring the Switch’s Name, Location, and Contact
This procedure explains how to assign a name to the switch. The name
appears at the top of the menus. Names can help you identify your
switches when you manage them and help you avoid performing a
configuration procedure on the wrong switch. This procedure also assigns
the name of the administrator responsible for maintaining the unit and the
location of the switch.
To assign a name, location, and contact to a switch, perform the following
procedure:
1. From the Main Menu, shown in Figure 1, type 5 to select System
Administration.
Figure 1. Main Menu
Allied Telesis AT-9424Ts - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2009
Main Menu
1 - Port Configuration
2 - VLAN Configuration
3 - Spanning Tree Configuration
4 - MAC Address Tables
5 - System Administration
6 - Advanced Configuration
7 - Security and Services
8 - Enhanced Stacking
C - Command Line Interface
Q - Quit
Enter your selection?