Figure 116: poe device information – Allied Telesis AT-S63 User Manual
Page 288
Chapter 17: Power Over Ethernet
288
Section II: Advanced Operations
Power Priority
The port priority. This can be Critical, High, or Low. To adjust this
value, refer to “Configuring PoE Port Settings” on page 282.
Power Class
The IEEE 802.3af class of the device. This parameter cannot be
changed.
Voltage
The voltage being delivered to the powered device
Current
The current drawn by the powered device.
4 - PoE Device Information
This selection displays the hardware and firmware version numbers of
the PoE chipset used in the switch. This selection is intended for
troubleshooting purposes and displays the following window:
Figure 116. PoE Device Information
Allied Telesis AT-924T/POE - AT-S63
Production Switch
User: Manager
11:20:02 02-Jan-2009
PoE Device Information
MCU Device Info:
Hardware Version ......... 0
Firmware Version ......... 0290
PSE Devices Info:
Device 0 Hardware Version .... 1
Device 1 Hardware Version .... 1
R - Return to Previous Menu
Enter your selection?