Allied Telesis AT-S63 - Manual (Page 396)

Chapter 21: SNMPv3
396 Section IV: SNMPv3
The Configure SNMPv3 Community Table menu is shown in Figure
140.
Figure 140. Configure SNMPv3 Community Table Menu
3. To create an entry in the SNMPv3 Community Table, type 1 to select
Create SNMPv3 Table Entry.
The following prompt is displayed:
Enter Community Index:
4. Enter the name of this Community Index.
This parameter describes the name of this community and is used to
index the other parameters in an SNMPv3 Community Table entry.
Enter a value of up to 32 alphanumeric characters.
The following prompt is displayed:
Enter Community Name:
5. Enter a Community Name of up to 64 alphanumeric characters.
The value of the Community Name parameter acts as a password for
the SNMPv3 Community Table entry. This parameter is case sensitive.
Note
Allied Telesis recommends that you select SNMP Community
Names carefully to ensure these names are known only to
authorized personnel.
Allied Telesis AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Configure SNMPv3 Community Table
Community Index ............... ATIIndex1
Community Name ................ 451engineering75
Security Name ................. debashi48
Transport Tag ................. sampletag
Storage Type .................. NonVolatile
Row Status .................... Active
1 - Create SNMPv3 Table Entry
2 - Delete SNMPv3 Table Entry
3 - Modify SNMPv3 Table Entry
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?