Allied Telesis AT-S63 - Manual (Page 55)

AT-S63 Management Software Menus User’s Guide
Section I: Basic Operations 55
Displaying Uplink Port Information
To display information about the GBIC, SFP, and XFP transceivers
installed in the uplink ports, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 2 on page 31.
2. From the System Administration menu, type 1 to select System
Information
The System Information menu is shown in Figure 9 on page 50.
3. From the System Information menu, type U to select Uplink
Information.
The Uplink Information menu is shown in Figure 11.
Figure 11. Uplink Information Menu
The Uplink Information menu displays the status of the GBIC, SFP, or
XFP transceivers installed in the switch. The number and type of
transceivers depend on the model of the AT-9400 Switch. The display
shows “Present” for slots that have transceivers and “Not Present” for
slots that are empty.
Note
The Uplink Information menu only indicates whether or not
transceivers are installed in the slots. The information does not
reflect port status.
4. To view detailed information about a transceiver, type its
corresponding number. The information displayed depends upon the
type of transceiver and the vendor.
Allied Telesis AT-9424T/GB - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2009
Uplink Information
1 - GBIC/SFP 1 ............ Not Present
2 - GBIC/SFP 2 ............ Present
R - Return to Previous Menu
Enter your selection?