Lenze PLC Designer R3-x - Manual (Page 11)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
11
About this documentation
Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This documentation uses the following conventions to distinguish between different types of
information:
Type of information Writing Examples/notes
Spelling of numbers
Decimal separator
Point The decimal point is always used.
For example: 1234.56
Text
Version information
Blue text colour All information that applies to from a certain software
version of the drive onwards are marked accordingly in this
documentation.
Example: This function extension is available from software
version V3.0!
Program name » « »PLC Designer«...
Window italics The Message window... / the Options dialog box...
Variable names By setting bEnable to TRUE...
Control element bold The OK... button / The Copy... command / The Properties...
tab / The Name ... input field
Sequence of menu
commands
If the execution of a function requires several commands in
a row, the individual commands are separated by an arrow:
Select File  Open to...
Shortcut <bold> Use <F1> to open the online help.
If a key combination is required for a command, a "+" is
placed between the key identifiers: With <Shift>+<ESC>...
Hyperlink Underlined Reference to further information: Hyperlink to further
information.
Icons
Page reference
( 11) Reference to further information: Page number in PDF file.
Step-by-step instructions  Step-by-step instructions are indicated by a pictograph.