Lenze PLC Designer R3-x - Manual (Page 89)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
89
The L_DAC_DataConversion library
L_DAC_ResetBitOfByte - conversion block
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.5 L_DAC_ResetBitOfByte - conversion block
This function sets an individual bit to "0" within a value of the "BYTE" type.
Inputs
Output
Function library: L_DAC_DataConversion
Runtime software licence:  LPC 1x00  MPC 1x00  MPC 2xx0  MPC 3x00
L_DAC_ResetBitOfByte
BYTE ⎯ byInput L_DAC_ResetBitOfByte ⎯ BYTE
BYTE ⎯ byBitNr
Identifier/data type Information/possible settings
byInput
BYTE
Input signal
byBitNr
BYTE
Number (0 ... 7) of the bit that is to be set.
Identifier/data type Information/possible settings
L_DAC_ResetBitOfByte
BYTE
Output signal
• Value results from the deleted bit.