Lenze PLC Designer R3-x - Manual (Page 50)

Working with the sample projects
Sample project with "Table positioning" application - TablePositioning
50
Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.2.6.6 Parameter
The Parameter button selects the visualisation of the parameter FBs.
• The mode selected last remains active.
• You can use the FBs to...
• read individual parameters (L_DCO_ReadDriveParameter)
• write individual parameters (L_DCO_WriteDriveParameter)
• Area  shows the FB for reading parameters.  L_DCO_ReadDriveParameter ( 105)
• Area  shows the FB for writing a parameter table.  L_DCO_WriteDriveParameter ( 110)
 Read parameters  Write parameters