Lenze PLC Designer R3-x - Manual (Page 43)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
43
Working with the sample projects
Sample project with "Table positioning" application - TablePositioning
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
"Drive" program
• The "DRIVE (PRG)" program actuates the controller using the function block
L_LCB_TablePositioning an.
• The machine constants are provided in a conditioned manner by means of the
L_LCB_SetAxisData block.
• The connection of the AXIS_REF-instance(LC_Drive) provides a connection to the control
configuration.