Lenze PLC Designer R3-x - Manual (Page 36)

Working with the sample projects
Sample project with the "Actuator speed" application - Actuator Speed
36
Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.1.6.4 Service mode
• Button  selects the service mode.
• Button  starts the motion profile.
• Button  inhibits the motion profile.
• Button sets clockwise rotation (clockwise rotating direction of the motor).
• Display field  indicates the status of the mode.
• Display field  indicates the current speed (variable Actual Value).
• Display field  shows the currently set speed setpoint.
• Possible setpoint data for the motion profile: 0 ... 100%.
• Dialog box shows the status of the machine.
• Control field  shows the bus communication status.
• Control field Error indicates the error message status.
• Error in the application
• Error in the controller
• The Error Reset button resets the error messages.
 Select mode  Stop button Status of the service mode
Start button  Activate clockwise
rotation (CW)
 Actual speed Setpoint speed

Note!
If a bus communication error occurs, the control and drive controller are to be restarted,
since the sample application does not support an automatic reset of bus
communication.