2 automatic mode, Automatic mode, Working with the sample projects – Lenze PLC Designer R3-x User Manual
Page 46
Advertising
Working with the sample projects
Sample project with "Table positioning" application - TablePositioning
46
Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.2.6.2
Automatic mode
• Button selects the automatic mode.
• Button starts the motion profile.
• Button inhibits the motion profile.
• Display field indicates the status of the mode.
• Display field indicates the current profile number.
• Display field indicates the set position.
Select mode
Stop button
Current profile
number
Start button
Mode status
Set position
Advertising