Lenze PLC Designer R3-x - Manual (Page 15)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
15
Preconditions
Where can I receive a full version of the PLC Designer?
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.3 Where can I receive a full version of the PLC Designer?
The »PLC Designer« is provided for download in the Lenze Application Knowledge Base (AKB) .
• The AKB is a product- and application-oriented collection of information provided by Lenze.
• Alternatively you can install the »PLC Designer« from the CD supplied with the Controller.
3.3.1 Installation

How to install the »PLC Designer«:
1. Select »PLC Designer« to save the full version as a packed ZIP file on your PC (Engineering
PC).
• Unpack the ZIP file PlcDesigner_V3.x.zip on your PC.
• The ZIP file contains an installation file.
or
Start the PLCDesigner_V3.x.exe installation file from the DC supplied with the Controller.
2. Start the EXE file and follow the installation instructions.
3. After the installation the »PLC Designer« can be started.
If the »PLC Designer« is already installed, carry out an update of the version available or install the
full version parallel to the version available.

Further information and basics regarding the »PLC Designer« can be found in the
following documentation:
PLC Designer software manual
The manual is available on the CD supplied or on the Internet.