Lenze PLC Designer R3-x - Manual (Page 14)

Preconditions
System requirements
14
Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Preconditions
3.1 System requirements
[3-1] Illustration example: System structure with a Controller 3200 C
3.2 What is the PLC Designer?
The »PLC Designer« is a Lenze engineering tool for programming the PLC of Lenze Controllers. The
Controller is the central control component of the Lenze Controller-based Automation system.
Product features
• Five different editors for the programming languages standardised in the IEC 61131-3 and a
very efficient CFC Editor are available. They can be used to create your own programs or to
address the functions of the Logic & Motion runtime software.
• By means of the integrated visualisation the processes are shown, in order to obtain all
important pieces of information at a glance during commissioning.
Engineering PC Controller
Hardware PC/notebook PLC (Logic) from firmware V3.1
Operating system Windows XP Windows CE
Required Lenze software »PLC Designer« V3.1 Logic
Further requirements Depending on the respective sample
application:
• CAN or EtherCAT bus system
• CAN or EtherCAT node