Lenze PLC Designer R3-x - Manual (Page 93)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
93
The L_DAC_DataConversion library
L_DAC_BitsToByte - bit multiplexer
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
11.11 L_DAC_BitsToByte - bit multiplexer
This FB converts eight input bits into a value of the "BYTE" type.
Inputs
Outputs
11.12 L_DAC_BitsToDWord - bit multiplexer
This FB converts 32 input bits into a value of the "DWORD" type.
Inputs
Outputs
Function library: L_DAC_DataConversion
Runtime software licence:  LPC 1x00  MPC 1x00  MPC 2xx0  MPC 3x00
L_DAC_BitsToByte
BOOL ⎯ xBit0...xBit7 byOutput ⎯ BYTE
Identifier/data type Information/possible settings
xBit0...xBit7
BOOL
Input signal 1...8
Identifier/data type Information/possible settings
byOutput
BYTE
Value of the "BYTE" type, which results by the bit set.
Function library: L_DAC_DataConversion
Runtime software licence:  LPC 1x00  MPC 1x00  MPC 2xx0  MPC 3x00
L_DAC_BitsToDWord
BOOL ⎯ xBit0...xBit31 dwOutput ⎯ DWORD
Identifier/data type Information/possible settings
xBit0...xBit31
BOOL
Input signal 1...input signal 32
Identifier/data type Information/possible settings
dwOutput
DWORD
Value of the "DOUBLE WORD" type, which results by the bit set.