Lenze PLC Designer R3-x - Manual (Page 17)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
17
The Controller-based Automation system
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Lenze supply specially matched system components:
• Controller as control and visualisation system
• The Controller is the central component in Controller-based Automation which uses the
runtime software to control the Logic and Motion functionalities.
• The controller communicates with the field devices via the fieldbus.
• Engineering tools for the Engineering PC
• The Engineering PC uses the Ethernet to communicate with the Controller.
• Use the various Engineering tools to configure and parameterise the system.
• Fieldbuses
• Field devices