Rockwell Automation 1305 AC Drive, Series A and B, Firmware 4.xx-5.xx - Manual (Page 50)

Chapter 3 – Human Interface Module
3-10
PROCESS MODE
ACTION DESCRIPTION HIM DISPLAY
or
or
or
or
❏ 1. When selected, the Process mode will show a custom display consisting of
information programmed with the Process Display group of parameters.
a. Complete steps a – c on page 3-7 to access the Program mode.
b. Press the Increment/Decrement key until “Process Display” is shown.
Press Enter.
c. Using the Increment/Decrement keys, select [Process Par] and enter
the number of the parameter you wish to monitor. Press Enter.
d. Select [Process Scale] using the Increment/Decrement keys. Enter the
desired scaling factor. Press Enter.
e. Select [Process Text 1] using the Increment/Decrement keys. Enter the
desired text character. Press Enter and repeat for the remaining
characters.
Choose Group
Process Display
Choose Mode
Program
Process Par
1
Process Scale
+1.00
Process Text 1
V