Rockwell Automation 1305 AC Drive, Series A and B, Firmware 4.xx-5.xx User Manual
Page 51
Advertising
Chapter 3 – Human Interface Module
3-11
PROCESS MODE (cont.)
ACTION
DESCRIPTION
HIM DISPLAY
or
ESC
ESC
SEL
press
f. When process programming is complete, press ESC until “Choose
Mode” is displayed. Press Increment/Decrement until “Process” is
displayed. Press Enter to get process value.
g. With Series A HIM Software Versions 3.00 and above or Series B HIM
Software Versions 1.01 and above. the user has the ability to save the
Process Display for power up. To do this, simultaneously press
Increment and Decrement keys on programming panel.
Choose Mode
Process
+0.00 V
Advertising