Jeppesen JeppView 3 - Manual (Page 101)

JeppView User's Guide
104
The following table briefly describes the right-click menu of a route in the RoutePack
List. Keyboard shortcuts are noted in parentheses when available. For the keyboard
shortcut to work, the item that would normally be right-clicked must be selected.
Re-Plan This Route
(Wizard)
Enables you to re-plan an existing route in your
RoutePack using the Re-Plan Route Wizard.
Find/Insert Waypoint
Displays the Search dialog box, which enables you to
search for an airport or navaid, locate it, and then
insert or append it to the route.
Append Waypoints
Stop Appending
Waypoints
Enables you to add waypoints to the end of a route by
clicking on the enroute chart. Finish adding to the
route by right-clicking the chart and choosing Stop
Appending Waypoints.
Show Route
(CTRL+R)
Zooms the enroute chart to display the selected route
on the screen.
Show Approaches
Within
Opens the geographic area Filter Setup dialog box.
Enter a distance and a yellow outline surrounds the
route covering the distance from the route you
specified. Only airports located within that area appear
in the Airport List.
Reset to current Chart
Type Preferences
Applies the terminal chart filters set in the Detailed
Chart Filter Settings dialog box. This might add or
remove terminal charts from the selected route.
Recommended Topic:
Filtering Terminal Charts in the
RoutePack
Reverse Route
Changes the selected route by reordering the
waypoints in reverse order.