Jeppesen JeppView 3 - Manual (Page 179)

JeppView User's Guide
182
3. The following information is optional in the Route: (Optional) field:
• Waypoint identifiers (such as airports, navaids, or intersections) along
your route.
• Enter LOW or HIGH to route along the low or high enroute airway
system.
• To specify an airway, enter the Victor or Jet airway number (V220,
J151
). When assigning Victor and Jet airways, you also need to assign
an airway entry, exit or Enroute Airspace Fix on both sides of the
airway. For example, PNH V280 FRAIZ. When changing from one
airway to another, the correct connector must be supplied.
• Enter VNA in the Route field to plan a route using VORs, NDBs and
airports.
• Enter DIRECT to plan a route or segment with a direct flight to another
waypoint (for example, LOXZ DIRECT VIC LOW LIRE, where LOXZ is
the departure airport; LIRE is the destination airport, and DIRECT VIC
LOW is entered in the Route field).
• To enter more than one item, place a space between each one (as
shown above).
3. Click Next.
4. On the second RoutePack Wizard screen (Figure 4-4), enter the alternate
airport information. If no alternates are planned for the route, click Next and
proceed to step 8.
To add an alternate airport:
• Type the identifier, city, or name for the alternate airport in the field
on the right.