Jeppesen JeppView 3 - Manual (Page 140)

Working with the Airport List
143
Clearing the Favorite Airports Filter
To clear the favorites-only filter and display the full list of airports, do either of the
following:
• Click Filter in the Airport List window and select Enable Airport Filter to
remove the associated check mark. Use this option if you have established
airport filters you would like to use often.
• Click Filter in the Airport List window and select Airport Filter Settings. In
the Filter Settings dialog box, do one of the following:
o
Clear the Show Only Favorite (Checked) Airport check box to clear
only the show-favorites filter.
o
Click Reset this page to clear all filters on the Airport tab.
o
Click >Reset all pages to clear all airport filters.
Even when the favorites-only filter is cleared, all favorite airports still have their
check boxes selected. You can reapply the filter at any time to restrict the list to only
those airports.
Airport Filters
The Filter Settings dialog box allows more detailed filtering of airports and terminal
charts listed in the Airport List. This section reviews how to filter airports within the
Airport List. If you would like additional information about filtering terminal charts,
see
Terminal Chart Filters .
To set criteria for what airports appear in the Airport List: