Jeppesen JeppView 3 - Manual (Page 198)

RoutePacks and Route Planning
201
Resetting To the Default Filter Settings
After filtering terminal charts in the RoutePack List, you might want to return to the
default setting for terminal chart types. You can reset chart types for departure,
destination, or alternate airports, as well as those for other enroute airports in a
route.
To reset the filters:
1. Do one of the following:
• Click Edit > Chart Type Filter.
• Click Filter in the RoutePack List window.
• Click Filter in the Airport List window and select Detailed Chart
Filter Settings.
2. Click the Departure, Destination, or Alternates tab as appropriate.
3. Click the appropriate reset button:
• Click Reset this page to reset the default terminal chart type
selections for the respective tab only.
• Click Reset all pages to display the default terminal chart type
selections for all terminal charts (including filters you may have set for
the Airport List).
4. Click OK.
This sets the chart filter for future RoutePacks but not the present one. To reset
current RoutePack filters, repeat the steps outlined in
Applying Filters to Existing
RoutePacks, Routes, and Airports .
Setting the Chart Types for Other Airports
After filtering terminal charts in the RoutePack List, you might want to return to the
default setting for terminal chart types. You can reset chart types for departure,