Jeppesen JeppView 3 - Manual (Page 214)

Printing
217
due to decluttering considerations, but the program does take into
account the chart preferences.
• Departure and Destination prints the departure and destination at a
1:250,000 scale. If selected, these charts print first in the Trip Kit.
• Entire Route prints an overview enroute chart page displaying the
route. When Strip Charts is also selected, the overview page contains
numbered boxes representing each of the strip chart pages to be
printed. If a RoutePack with more than one route is being printed, the
system prints an overview chart page for each route.
• Strip Charts prints your entire route in sequential pages, at one of
seventeen scales ranging from 1:2,084 to 1:134,775,469. Specify any
theme scale with any theme. Scales for printed charts are labeled:
o
(**) — Indicates the scale of the current view in the Enroute
Charts View.
o
LAE — IFR Low Altitude Enroute Charts
o
HAE — IFR High Altitude Enroute Charts
o
WAC — World Aeronautical Charts
o
SEC — VFR Sectional Charts
The amount of paper required to print the charts depends on the scale you
choose, the length of your route and your page setting selection.
NOTE
Depending on the print scale, enroute chart objects might print differently
than what appears on the screen. Use Print Preview to view the
appearance of the printed chart. To match the chart objects in Print
Preview to the onscreen view, adjust the zoom level and chart preferences.
3. Select the information that you want to print in the Terminal Procedures
section of the Printing [RoutePack] dialog box.
• Revision Letter includes a list of all terminal charts in the RoutePack
that have changed since the last revision cycle. The Only Changed
Charts (revised) option prints only the terminal charts listed in the
Revision Letter.
o
Only Changed Charts (revised) is available only if the Revision
Letter check box is selected.
o
Only Changed Charts (revised) is unavailable if the Only
Changed Charts (updated) check box is selected under Update
Letter.
o
Only Changed Charts is not available if JeppView Charts for
[RoutePack] is selected.