Jeppesen JeppView 3 - Manual (Page 227)

JeppView User's Guide
230
The Microsoft 2000 fax driver is preinstalled.
To print to the fax driver using Microsoft 2000:
1. Launch JeppView.
2. Click File > Print > Print [enroute or terminal] Chart.
3. In the Name field, select your Fax and then click OK.
4. In the Send Fax Wizard dialog box, click Next.
5. In the Recipient/Dialog Information dialog box, type your name and fax
number, and then click Add.
6. Click Next.
7. Type the appropriate information in the Cover Page dialog box and then click
Next.
8. Type the appropriate information in the Scheduling Transmission dialog
box and then click Next.
9. Click Finish.
FAX from Windows Vista
After the fax driver is installed:
1. Launch JeppView.
2. Click Print > Print [enroute or terminal] Chart.
3. Under Name, select your fax, and then click OK. The Send Fax Wizard
opens.
4. Choose Connect to fax modem or Connect to fax server on network and
click Next.
5. Select or enter the fax name and click Next.
6. Select how to receive faxes and click Next.
7. The fax dialog opens. Enter the number to send to and any other
information.
8. Enter any dialing rules for the number you are sending from.
9. Click Send.
Fax from Windows XP
After the fax driver is installed:
1. Launch JeppView.
2. Click Print > Print [enroute or terminal] Chart.
3. Under Name, select your fax, and then click OK. The Send Fax Wizard
opens.
4. Click Next. The Recipient/Dialog Information dialog box opens.