Jeppesen JeppView 3 - Manual (Page 163)

JeppView User's Guide
166
To view another chart, do either of the following:
• Click any terminal chart in the Airport List or RoutePack List.
• Press the UP and DOWN arrow keys on the keyboard to move up or down the
chart list. The RIGHT arrow key acts the same as clicking the + sign and
expands the chart list for an airport. The LEFT arrow key collapses a chart list
under an airport.
High Quality Mode Terminal Chart Display
JeppView displays terminal charts on the screen in High Quality (HQ) mode by
default. HQ sharpens and thickens terminal chart characters for easier readability,
and has more shading around text. It may look fuzzy up close, but it is generally
clearer at a distance. The differences between enabling HQ mode and disabling HQ
mode are more apparent on an LCD screen than on a CRT screen.
• To disable HQ mode, right-click in the Terminal Chart View, and then choose
High Quality Mode to clear the check mark.
• To enable HQ, choose the High Quality Mode command again.
Navigating in the Terminal Charts View
Navigating in the Terminal Charts View is similar to navigating in the Enroute Charts
View. Scrolling and zooming function, as well as the Next and Previous functions, are
the same as for enroute charts.
For terminal charts, JeppView provides additional buttons on the Chart toolbar and
additional menu commands that set preset views of most of these charts. Click
Show Decluttered Chart to fade the colors of terrain, roads, cities, and other non-