Jeppesen JeppView 3 - Manual (Page 259)

JeppView User's Guide
262
How do I change the "Licensed to:" name when I print terminal charts?
If you installed JeppView with a NavSuite CD set:
1. Uninstall and deactivate JeppView.
2. Reinstall and reactivate, and enter the name you want to show as "Licensed
to:" in the Name box of the Pilot Information dialog, at the beginning of
the program CD installation.
If you installed JeppView from a JeppView/FliteDeck CD set, please contact Jeppesen
Technical Support for help creating a new registry setting.
I tried to print an enroute chart, but it only prints a blank page.
Right-click a blank area in the Enroute Charts View, choose Properties, click the
Projection tab, change the current projection, and then print your chart again. If
you were still unable to print successfully, please
contact technical support to tell
them the projection you were unable to print.
How do I print or print preview in the Enroute Charts View?
With the Enroute Charts View displaying what you what to print, click the Print
button on the
Standard toolbar, or click File > Print > Enroute Chart.
When I try to print a chart, it takes a significant amount of time and only
part of the page prints.
Open your printer control panel. This is done in a variety of ways depending on your
Windows version.
Click Properties, the Ports tab, and then increase the time-out for your printer.
If this does not solve the problem, contact Jeppesen support with your printer model,
Windows version, and printer driver for other possible settings. The printer driver
information prints when you print a test page.
I am unable to print my terminal charts or they do not print correctly.