Jeppesen JeppView 3 - Manual (Page 148)

Working with the Airport List
151
• By accessing the Show Approaches Within right-click menu command from
any RoutePack, route, airport, or navaid.
Filtering Airports with the Geographic Area Tab
In the Filter Settings dialog box, the Geographic Area tab allows you to filter
airports displayed in the Airport List according to a specified location.
To view the Geographic Area tab:
1. Click Filter in the Airport List window and select Airport Filter Settings.
2. In the Filter Settings dialog box, click the Geographic Area tab.
The Geographic Area tab has many options you can use to filter airports
geographically.
Matching Locations
Match any of these locations filters airports according to entered search criteria.
Type an airport ICAO identifier (or a portion of the identifier), city, state, or country
in the appropriate text box. To enter more than one item in the State and Country
field, separate them with a comma. After you have entered the search criteria, click
OK.
JeppView displays in the Airport List only airports that match the entered search
criteria. For example, if you entered “Denver” in the City field, only airports located
in Denver appear in the Airport List. The results vary if other filters are applied.
To search for airports by territory or province, enter the abbreviation or the name in
the State field. For example, to search for airports in Quebec, enter "Quebec" or
"QC".
Filtering Airport within a Defined Area
The Are within... filter options filters airports in relation to a selected location.
When you set a geographic area filter, a yellow outline appears on the Enroute
Charts view within which the airports in the Airport List are located. The default
setting is No Geographic Area Filter, but you can use three other filtering setting
options:
• The A rectangle bounded by option filters airports within a rectangle. Type
the appropriate latitude and longitude points for the northwest and southeast