Jeppesen JeppView 3 - Manual (Page 72)

Using the Enroute Chart
75
9. Follow the prompts on the remaining installation windows.
If the download is interrupted for any reason, JeppView commences downloading at
the point it stopped when reconnected.
NOTE
Download options are active only if you do not have current enroute
chart data, the most recent terminal chart revision cycle, the newest
program version of JeppView, or updated electronic text pages. All of
these updates are available on CD as well.
Approximate
Download
Speeds and
Times
Worldwide
(17MB)
North America
(9MB)
Europe(5MB)
56 Kbps
(7KB/sec)
42
minutes
22 minutes 12 minutes
384 Kbps
(48KB/sec)
8 minutes 5 minutes 3 minutes
900 Kbps
(112KB/sec)
3 minutes
1 minute, 30
seconds
1 minute
NOTE
Cable Modems/DSL/fractional T1 connections may reach the 384-
900+ Kbps range.
The UpdatePack
You might prefer to update your entire subscription only on your desktop PC, and
then transfer the updated information to your in-cockpit computer using a USB
memory device. The UpdatePack gives customers with multiple machines an easy
way to copy Jeppesen programs and data from one machine to another.
Before creating an UpdatePack, read through the limitations to avoid complications:
• You can save an UpdatePack file anywhere; however, avoid keeping old
UpdatePacks anywhere in the C:\Jeppesen folder. Any existing UpdatePacks
that reside in this folder roll into your new UpdatePack, unnecessarily
increasing the file size.
• The serial numbers of the Jeppesen software on the origin and target
machines must match. Otherwise, the UpdatePacks will not transfer data. In
the case of different coverages, the UpdatePacks still work.
• UpdatePacks work with the following software versions or later: FliteStar/Map
v9.0, JeppView v3.0, and FliteDeck v3.0.
Creating an UpdatePack