Deactivating jeppview, Deactivate jeppview, Deactivating a site – Jeppesen JeppView 3 User Manual
Page 65
JeppView User's Guide
68
Windows Vista is configured to show all hidden files.
Deactivating JeppView
Because you may need to use JeppView on a notebook computer in addition to your
desktop computer, your
permits this, as long as you are the only
person using the program(s). If more than one person needs to use the software, or
if you otherwise need additional site keys, you can purchase them by calling
Notwithstanding the notebook computer exception to the single-computer license, if
you need to move JeppView or the NavSuite products from one computer to another,
you must first deactivate them on the computer from which you are removing it;
otherwise you may not use it on the new computer.
After you have activated JeppView or the NavSuite Products on the maximum
number of computers, you can deactivate one of them and move it to a new
computer by following one of the methods below:
• Uninstall the program, and choose Yes when the deactivation wizard asks if
you would like to deactivate JeppView or NavSuite. See
• Locate and run the deactivate.exe program in the folder containing your
JeppView files. If you installed JeppView in the default location, it will be in
one of the following locations:
o
C:\Jeppesen\JeppView3
(Windows 2000 and XP)
o
C:\Program Files\Jeppesen\JeppView3
(Windows 2000, XP and Vista)
NOTE
If you are installed JeppView as part of NavSuite, deactivating JeppView
also deactivates the other NavSuite products on the computer.
If the deactivation wizard presents a list of programs to deactivate, select JeppView
or NavSuite and follow the on-screen instructions:
1. Read the warning to ensure you really want to deactivate JeppView or
NavSuite. Select the check box and click Next.
2. Select how you want to deactivate JeppView or NavSuite (we strongly
recommend selecting the Automated method if you have an Internet
connection), and click Next. If you select Automated, JeppView deactivates,
and a dialog box containing the deactivation information appears.
3. After your deactivation information has been displayed, you can install
JeppView or NavSuite on the new hardware.
Although it no longer runs, JeppView or the NavSuite products are not uninstalled
from the old computer. Install the software on another computer and follow the
Activation Wizard. To reactivate the programs from a computer that previously ran
them, open the program and the Activation Wizard runs again.
Be sure to keep a copy of your serial number and site keys for each computer in case
your hard drive or computer fails and you have to replace it.