Jeppesen JeppView 3 - Manual (Page 150)

Working with the Airport List
153
• The A corridor of width option filters airports around a route. This is active
only when a route is displayed in the Enroute Charts View. To initially set the
corridor of width, do one of the following:
o
Right-click an airport, navaid or route in the Enroute Charts View and select
Show Approaches Within (see
Using the Enroute Chart View to Apply
Geographic Filters below).
o
Right-click an airport in the Airport List or RoutePack List and select Show
Approaches Within.
o
Right-click a RoutePack or route in the RoutePack List and select Show
Approaches Within.
To modify the corridor width, edit the information in the Geographic Area tab
of the Filter Settings dialog box.