Jeppesen JeppView 3 - Manual (Page 83)

JeppView User's Guide
86
Use the keyboard to select a sequential range of items, a non-sequential range, or all
items on an Airport List or RoutePack List.
To select a range of items:
1. Click to select an item.
2. Hold the SHIFT key, and then click another item on the list.
All items in between the two selections are selected.
To select non-consecutive items:
1. Click to select an item.
2. Hold the CTRL key, and select additional items in the list.
To select all items in the list, select any item and press CTRL+A.
NOTE
Multiple select only works for like items. For example, if you select
an airport, you can select additional airports using multiple select,
but not terminal charts or routes.
Notebook Features
JeppView provides two features that enable you to take notes electronically and
record your comments: the Notebook tab available in the main JeppView window
and the Notebook tab of the navaid Properties dialog boxes (airports, VORs,
airways, etc.).
Using the Notebook View
To open the Notebook tab, do either of the following:
• Click the Notebook tab.
• Click Tools > Notebook.
Use the Notebook controls, normally at the lower left of the Notebook View to work
with the Notebook. These controls can be undocked and moved around like other
JeppView objects.
The following describes the Notebook controls:
• Add Note allows you to add entries with a date and time stamp.
To add a dated note, click Add Note, enter your comments, and then click
OK.