Jeppesen JeppView 3 - Manual (Page 75)

JeppView User's Guide
78
See: Displaying Terminal Chart Changes
Revision Letters and Update Letters
An Update letter differs from a Revision Letter in these ways:
• An Update Letter lists what has changed since you last printed your
RoutePack.
• A Revision Letter lists what has changed between the last data cycle and the
current data cycle.
• When you print a RoutePack, a baseline print date is set for the charts. Save
the RoutePack, and the next time you open that RoutePack, your Update
Letter lists the charts that need the be reprinted, even if it has been several
cycles since the last printing.
• If you have never printed the RoutePack, the Update Letter option is grayed
out because this option doesn't make sense if a RoutePack has not been
printed.
Examples
Revision Letter Use. You decide to print out your entire subscription and put the
charts in your Jeppesen binders. After the next JeppView update, you can select all
airports in your subscription and print out the charts in the Revision Letter, replace
those charts in your binders and your printed charts will be updated.
Update Letter Use. You only print out the charts in a RoutePack and keep these
charts on your kneeboard. After two or three JeppView updates, you can select that
RoutePack and then print out the charts in the Update Letter. This prints only the
charts from the RoutePack that have changed since the last time you printed the
RoutePack. Replace those charts on your kneeboard and your printed charts will be
updated.
Another Use of a Revision Letter. Print the charts in the RoutePack Revision
Letter if you would like to print all charts in that RoutePack that have changed since
the last revision, regardless of the printing history of the RoutePack.
JeppView prints two types of revision letters: the revision letter that applies to a
RoutePack, and the revision letter that applies to your subscription in general.
Printing a Revision Letter
A revision letter prints a list of charts that have changed since the last revision cycle.
Printing a Revision Letter for a RoutePack, Route, or Airport
To print a revision letter for a RoutePack, route, or one or more airports:
1. Open the Print dialog box by doing any of the following:
• Right-click the item in the RoutePack List or Airport List and choose
Print.