Jeppesen JeppView 3 - Manual (Page 147)

JeppView User's Guide
150
• Public, Private, or Military displays one or a combination of those airport
types. When two or more criteria are selected, the filters work as an “and”
operation where the filtered airports meet all selected criteria.
• Have These Fuel Types / Services displays only airports in the Airport List
that have selected fuel or the services available. Scroll down the list to view
additional fuel and service options.
• The VFR Airports section is only applicable for European VFR airports.
• Night VFR Capable displays respective Aerodromes that are Night
VFR capable. See the Aerodrome Directory for further details, airport
hours of operations, and restrictions.
• PPR displays Aerodromes that do not have published hours of
operations. Prior permission (PPR) is required to use these
Aerodromes. See the Aerodrome Directory for detailed information
about the specific working hours and PPR procedures.
Clearing Airport List Filters
Airport filters set on the Airports tab remain in effect until the filters are cleared (or
the pages reset). See
Removing Filters for information about removing the filter
attributes.
Geographic Area Tab
When a geographic area filter is set, the Airport List displays only those airports
located within that area, enabling you to display and print charts for a particular
location. You can filter the Airport List according to a geographic area in three ways,
as follows:
• From the Geographic Area tab on the Filter Settings dialog box.
• By using the current view of the enroute chart to display only the contained
airports in the Airport List.