Jeppesen JeppView 3 - Manual (Page 189)

JeppView User's Guide
192
Dragging and Dropping Airports
To drag an airport from the Airport List to a route:
1. Point to the airport in the Airport List, and then press and hold the mouse
button.
2. Drag the airport to the RoutePack List and drop it onto the waypoint that will
follow the inserted airport.
The new airport appears in the RoutePack List along with its associated terminal
charts, and the system redraws the enroute chart to reflect the change.
Copying and Pasting Airports
To copy an airport from the Airport List and paste it into a route:
1. Copy an airport in the Airport List onto the clipboard by doing any of the
following:
• Select the airport and press CTRL+C.
• Right-click the airport and choose Copy.
• Select the airport and click Edit > Copy.
2. Paste the airport into the RoutePack List onto the waypoint that will follow the
inserted airport by doing any of the following:
• Select the waypoint and press CTRL+V.
• Right-click the waypoint and choose Paste.
• Select the waypoint and click Edit > Paste.
The new airport appears in the RoutePack List along with all its associated terminal
charts, and the system redraws the route on the enroute chart to reflect the change.
Using the RoutePack List
You can use the RoutePack List to insert waypoints into a route by using the same
drag-and-drop or copy-and-paste methods just described.
The object in the RoutePack List that you drop or paste the airport into determines
where that airport is inserted along the route.
Inserting Waypoints Using the Search Dialog Box
When you don’t know the exact identifier or location for the waypoint that you want
to insert into a route, JeppView helps you find it with the waypoint search function
provided in the Search dialog box. The search function enables you to search for an
airport, navaid, or intersection by entering its full or partial name, identifier, or city.
To insert a waypoint using the search function:
1. In the RoutePack List, select the waypoint that will follow the inserted
waypoint.
2. Open the Search dialog box by doing any of the following: