Jeppesen JeppView 3 - Manual (Page 47)

JeppView User's Guide
50
• Imaging software such as Symantec™ Norton Ghost™ and Acronis True
Image™.
• JeppView Program CD.
• Electronic Chart Data (ECD) Disc 1.
• Electronic Chart Data (ECD) Disc 2.
Creating a Master Image
To create an image with JeppView, install the program CD only. After the program
CD is installed, you can continue with imaging the system for other workstations.
1. Insert the Program CD into your computer CD-ROM drive. The Installation
Wizard appears. (If it doesn’t, browse to your computer CD-ROM drive and
double-click setup.exe.)
2. On the Welcome screen, click Next.
3. Read the information in the Installation Overview window and click Next.
4. Read the license agreement and accept the terms, and then click Next.
5. In the Pilot Information dialog box, enter at least your name and the 16-
character and alphanumeric JeppView serial number, and then click Next.
6. Select whether to install JeppView, FliteDeck, or both, and then click Next.
7. Select the path to install JeppView and click Next. Jeppesen recommends
that you use the default folder, which is C:\Program Files\Jeppesen or a
location where other Jeppesen programs have been installed. If you use a
different drive or folder, click Change, and then type the path or browse to
the folder.
8. Follow the remaining on-screen installation instructions to finish the program
installation. When the installation is complete, click Finish.
9. Click Close Window when the dialog box appears that instructs you to insert
the ECD Disc 1. Do not insert ECD Disc 1. After the image has been
transferred to each workstation, you will install the ECD data on all target
machines. If the computer requires a reboot, do so before beginning the next
procedure.
10. After you have finished installing the program CD, image the workstation
using an imaging software (for example, Symantec Norton Ghost or Acronis
True Image).
11. Deploy the master image to individual workstations.
Installing Electronic Chart Data Disc 1
After you have deployed the master image to the workstations, install ECD Disc 1
and 2 on the workstations. To install terminal charts, follow these steps:
1. If the setup program does not start automatically, click Start > Run. Type
d:\setup.exe
(where d: is the letter of the CD-ROM drive).