Right-click menu for enroute chart view routes, Waypoints – Jeppesen JeppView 3 User Manual
Page 96
Using the Enroute Chart
99
Find Approach
Charts
Locates the airport in the Airport List. (Available only
when the waypoint is an airport.)
Add [Airport]
Terminal Charts to
Adds the selected airport and all its currently filtered
charts to the RoutePack Other Charts folder. (Available
only when the waypoint is an airport.)
Center On
Centers the chart view on the selected object.
Show Approaches
Within
Opens the Filter Setup dialog box, which filters the
Airport List to show only airports within a selected
distance from the route.
Show Distance
From Here
Displays the distance from the selected waypoint to each
airport in the Airport List, and re-sorts the list from
nearest to most distant.
Delete
View and the program memory.
Properties
Opens the properties dialog box for the selected
waypoint.
Right-Click Menu for Enroute Chart View Routes
To open the right-click menu for routes on the Enroute Chart View, select any route
on the Enroute Chart View window. When selected, the route color changes from
blue to magenta.
Delete
Deletes the route from the view and the RoutePack List. If
the RoutePack was not previously saved, it is
unrecoverable after this deletion.
Show Approaches
Within:
Opens the Filter Setup dialog box, which filters the
Airport List to show only airports within the selected
distance from the route.
Show Route
Expands the view to display the entire route in the
window.
Opens the Route Properties dialog box for the selected
route.
Right-Click Menu for Enroute Charts View Waypoints on a Route