Jeppesen JeppView 3 - Manual (Page 104)

Using the Enroute Chart
107
Find Approach
Charts
Displays the airport at the top of the Airport List and
expands its terminal chart list.
Show Approaches
Within
Opens the geographic area Filter Setup dialog box. Enter a
distance and a yellow outline circles the airport with the
radius you specified. Only airports located within that area
appear in the Airport List.
Show Distance
From Here
Calculates the distance from the selected airport and
displays that distance in the Distance From column in the
Airport List.
Cut (CTRL+X)
Removes the airport from the route or Other Charts folder
and places it on the clipboard.
Copy (CTRL+C) Copies the airport onto the clipboard.
Paste (CTRL+V)
Places an airport from the clipboard in the route before the
selected airport. Terminal charts can be pasted into an
airport only if they belong to that airport.
Print
Displays the Print dialog box, enabling you to print the
airport information, terminal charts, and Revision Letter.
Delete (DELETE) Removes the airport from the route or RoutePack.
Properties
(ALT+ENTER)
Displays the airport properties dialog box, which provides
information about the airport as well as runway and
communications information. You can also enter comments
about the airport in the Notebook tab on the Airport
Properties dialog box.
RoutePack Airport Terminal Chart Right-click Menu
To open the RoutePack terminal charts right-click menu, select any terminal chart in
the RoutePack List and right-click.
Cut
Removes the terminal chart from the airport and places it in the paste
buffer.
Copy Copies the terminal chart into the paste buffer.